Halaman
▼
Jumat, 22 Februari 2013
Cleaning and Preventing Mold in Car Glass With Easy
Not only the arrival of the rainy season we need to anticipate the maintenance or checks on the legs and machinery to deal with damaged roads and flooded roads. There are "enemies" of other commonly arise in times when the weather is cold and damp, namely: mushrooms in glass-glass. Besides the car being less clean look, appearance of mushrooms that looked at the spots or gray circle on glass fairly disturbing view from inside the cabin to the outside.
The fix is simple. When you find mold on the auto glass like characteristics above and still not be lost despite being washed with water and scrubbed many times, just follow these steps.
- Prepare the yeast liquid cleaners that are sold in stores or large supermarkets vehicle accessories in your city.
- Wash your windshield with clean water, then dry using a cloth or chamois.
- Sprinkle evenly with liquid glass cleaner mushrooms.
- Rub with a clean dry cloth and smooth with rotating direction.
- Wipe again with a wet chamois until liquid mushrooms relievers are not left in the glass, then dry the glass with a chamois.
do it to 2 or 3 times for stubborn mildew.
In order to better results, do not coat the glass as a whole. Sprinkle some parts that will be our first rub. This is to help prevent blur effect (or like a rainbow when exposed to light) due to cleaning the dried mushrooms in the glass before we could rub it.
By considering the 6 points above, we can already eliminate fungus. However, for owners of cars made in Europe, there is little special attention when choosing a cleaning liquid yeast. Find a liquid which is devoted to European cars. Therefore, some European-made cars are more sensitive so sometimes the glass becomes dull or even scratched after polished. To avoid this you should ask the seller about the brand which can be applied to European car glass. To be even safer, you should try first on a small size glass, having polished and wait a few minutes to see the results.
If these measures had still not come to fruition, meaning fungus attached to your car's glass as very stubborn. This type can not be dealt with simply by cleaning fluid mushrooms. You need to bring the car to the salon. They have the tools and a special liquid to rub on the glass exposed to the fungus.
Do not forget, after the auto glass clean of mold, take care so that the fungus does not appear anymore. How to prevent it even simpler. First, immediately clean the car after driving in the rain so that dust or dirt does not stick long in the car glass. Second, for the glass front and back, always keep the washer water conditions so that we can use to clean the glass. Avoid using car cover if the weather is humid. If you would like to use, make sure the glass and car cover is dry before the vehicle is covered
How to Overcome tubeless tires Leaks Only a Few Minutes
This method is easy. You do not have to carry a motorcycle or car to the garage.
Tire leak is a frequent problem experienced by the driver of the car or motorcycle. Moreover, if a leak occurs in the middle of the road tires. For those of you bikers, builders will have to drive to nearest tire.
If you are using tubeless tires may be more relaxed. Because if the nail punctured tire, is more powerful than that used tire inner tube. If tubeless tires hit the nail, the nail will usually stuck on and new tires deflated several times slowly.
But, still, the tires will leak immediately when a nail pierced and slashed the tires. Ban will also instantly deflated. In fact, in addition to hard, repairing tubeless tires are much more expensive.
What is needed:
1. Pliers to remove nails or other objects that cause the leak.
2. Puncture iron, hot liquids, rubber patches inserts.
3. Knife
4. Smoothing leak
How to patch: 1. Check the tire leak and find the cause of the leak. Are the nails or other objects.
2. Use pliers to remove objects stuck in the tire, like a nail. Unplug carefully so as not to be larger leaks.
3. Insert into the hole that leaked smoothing. Pull-out in the hole a few times so that the hole that leaked into a smooth and large enough to insert a rubber patch. When finished, let the smoothing stuck in the tire.
4. Remove slowly and use a hot liquid adhesive to glue the parts are missing. Apply as much as two to three times until the liquid is evenly distributed.
5. Enter fillings rubber inserts that have smeared a little liquid glue into the hole using a puncture. Press firmly to arise protrusions. Ensure that the installation of the rubber inserts are done correctly and there are no leaks in that section.
6. Unplug puncture and leave for a few moments until the rubber inserts stick perfectly.
7. Pump the tires and cut the rubber inserts more prominent with scissors.
8. Consult the shop if it is still leaking.
That must be considered:
1. Always use protective gloves when using sharp objects such as knives, stab, and smoothing.
2. Using a smoothing tool can help in attenuating the tire, but it does not make your tires become worn and cause more leaks