City Car Mainstay Mitsubishi

City Car Mainstay Mitsubishi

 The aerodynamic design, is evident from the shape of the body that do not have a firm and smooth lines. Use of High Tensile material for vehicle body, making Mirage lightweight, strong and economical fuel consumption. Bright colors are also available to consumers in Indonesia. Choice of pop colors like green, lemon yellow, red, white, silver, gray, and black.

With a length of 3710 mm and a width of 1665 mm and height 1,500 mm makes Mirage has a wide cabin even for urban vehicles. Dimension Mirage is also advantageous to maneuver in the city, especially with a turning radius of just 4.4 meters Mirage add the ability of vehicles to the daily.

Interior

Impression of space is the first impression that you can see when entering the cabin Mirage. At the back there was even room for luggage capacity of 199 liters this vehicle. The use of high material fabric for seat makes the rider comfortable in driving this vehicle. The colors in the interior is two tone (black and beige) to Exceed variants as well as solid black in order to show the impression of luxury.

Moving into the audio console in the dashboard. Mitsubishi Mirage will be equipped with a four speaker audio system with USB port to play MP3's pet collection and DVD discs in a single package. Another unique feature is the ability of air conditioning in the cab at the Mirage are automatically set filled with just touch the button on the dashboard.

Multi Information Display (MID) in the dashboard console will accompany riders on the way. MID is in addition to record the distance and fuel consumption per kilometer also present vehicle service reminder function. This function makes the rider not forget to take care of their vehicles regularly.

Excellent feature is the use of the Mirage Keyless Operating System (KOS) in the Exceed variants and One-Touch Start System (OSS). KOS is a key system that is integrated with the system in the car so it does not need a key. Only by bringing in a bag KOS, the rider stay in touching distance of 70 cm vehicle then the vehicle will unlock itself and ready to operate by touch button start and stop. Similarly, when leaving the vehicle, this feature automatically locks the vehicle in 30 seconds.

Security in the Mitsubishi Mirage guaranteed by the feature RISE (Reinforced Impact Safety Evolution) that is able to distribute the power to the vehicle structure during an impact. Additionally airbag and seat belt equipped ELR (Electronic Locking Reactor) increase the security level in riding Mirage.

Performance

1200cc engine 3 cylinder 12 Valve DOHC MIVEC planted in all variants of these vehicles will produce maximum power 77 ps at 6000 rpm and torque at 4000 rpm 1000nm promises fuel consumption relatively economical compared to its competitors in the same class.

The latest is the Mitsubishi transmission technology for INVECS III CVT automatic transmission Mirage. This transmission helps the performance of the maximum vehicle control. Shift Lock System will move the position of N to P in order to facilitate the motorists to park in a parallel position.

How to reduce exhaust emissions
Various ways and efforts made to reduce the levels of toxic exhaust gases generated by machines such as motor vehicle fuel use lead-free, the use of a catalyst in the exhaust, etc..
As machine 2 steps that must be replaced by a 4 stroke engine, manual carburizing system will eventually be replaced by digital carburizing system.
Electronic fuel injection system (digital carburizing) was applied on motorcycle engines, slowly but surely going to replace the old system that had survived the carburetor (carburizing manual).
Because the motorcycle engine is a combination of chemical and physical reactions to generate power, then we are back to the basic theory of chemistry that fuel combustion reaction with O2 is perfect:
Part 14,7:1 = 14.7 O2 (oxygen) to 1 part fuel
Theory based on the density ratio of the elements, in practice, the above ratio (AFR - Air Fuel Ratio) modified to produce more power or an economical fuel consumption.
Carburetor also has the same goal of achieving conditions suitable comparison of chemical theory above but done manually. Carburetor likely set for average conditions where motorcycles are used so the results tend towards the fuel mixture more than the needs of the real machine.
For EFI as digital set then no change in the condition of the use of any motorcycle ECU will arrange for AFR ideal conditions can still be achieved.
For example: In the system there are differences in power if the carburetor motorcycle used during the day than the night, it is because the density of oxygen in the same volume of different, short amount of O2 remained unchanged pasokkan fuel (jet size does not change).
This does not happen on EFI system because of the air temperature sensor (Inlet Air Temperature) then the current density of O2 changing conditions, the fuel supply was adjusted (injector open time plus or minus). So who uses EFI motorcycles used day or night at an optimum or power remains the same.



The main difference compared Carburetor EFI is:
Carburetor EFI
Fuel is inhaled by the engine fuel injected / sprayed into the engine
Separately fused ignition Ignition System
Basic components of EFI
Each type or model of motorcycle have each design, but an outline contained the following components.
ECU - Electrical Control Unit
Central data processing machine usage conditions, to enter / input from the sensors to process then gives the output / output for the current and the amount of injection, ignition time.
Fuel Pump
Generates ready fuel pressure injected.
Pressure Regulator
Set the fuel pressure conditions always remain (55 ~ 60psi).
Temperature Sensor
Provide input to the ECU engine temperature conditions, a cold engine requires more fuel.
Inlet Air Temperature Sensor
Provide input to the ECU which will condition the air temperature going into the engine, cold air is more dense O2, requiring more fuel.
Inlet Air Pressure Sensor
Provide input to the ECU which will condition the air pressure going into the engine, the air pressure (in this type of motorcycle inlet upstream exist between the two headlights) O2 is denser, requires more fuel.
Atmospheric Pressure Sensors provide input to the ECU ambient air pressure conditions around motorcycles, the lowlands (coastal) O2 is denser, requires more fuel.
Crankshaft Sensor
Provide input to the ECU position and engine rotation speed, high torque requires open INJECTOR faster.
Camshaft Sensor
Provide input to the ECU engine positioning step, just a step that requires open INJECTOR suction.
Throttle Sensor
Provide input to the ECU position and magnitude of airflow openings, large openings require INJECTOR open longer.
Fuel Injector / Injector
Gate end of the fuel pressure, the main function of spraying fuel into the engine, opening and closing based on the order of ECU.
Speed ​​Sensor
Provide input to the ECU motorcycle speed conditions, gas plays in red light than 90km/jam speed, open the different INJECTOR.
Vehicle-down Sensor
Provide input to the ECU motorcycle condition, if the bike fell to the living conditions of the engine then the ECU will stop working FUEL PUMP, IGNITION, INJECTOR, for security and safety.
Electronic Fuel Injection is superior to the carburetor, as it can adjust the dose of a standard engine needs fuel.
ECU is programmed to fit the standard engine condition motorcycle models, there is a table in the ECU fuel injector that will be sent through the appropriate standard machine conditions.
If there is a change from the standard conditions such as air filters replaced or removed, although no air pressure gauge (inlet air pressure sensor) Fuel supply only changed slightly, motorcycles will eventually run is not normal because of too much O2 (lean mixture).
Standard ECU tables usually can not be changed, because the EFI main goal is the reduction of toxic emissions.
Require modifications to engine modification tables in ECU, this can be done by:
1. Software that can be entered into the memory ECU - solely owned by car manufacturers or dealers.
2. Additional tools beyond Piggyback ECU - works by manipulating the signal sent to the injectors to open for longer.
3. Exchange aftermarket ECU which can be programmed her memory tables, appropriate modifications, under the conditions of the circuit.

Cleaning and Preventing Mold in Car Glass With Easy

Not only the arrival of the rainy season we need to anticipate the maintenance or checks on the legs and machinery to deal with damaged roads and flooded roads. There are "enemies" of other commonly arise in times when the weather is cold and damp, namely: mushrooms in glass-glass. Besides the car being less clean look, appearance of mushrooms that looked at the spots or gray circle on glass fairly disturbing view from inside the cabin to the outside.

The fix is ​​simple. When you find mold on the auto glass like characteristics above and still not be lost despite being washed with water and scrubbed many times, just follow these steps.
- Prepare the yeast liquid cleaners that are sold in stores or large supermarkets vehicle accessories in your city.
- Wash your windshield with clean water, then dry using a cloth or chamois.
- Sprinkle evenly with liquid glass cleaner mushrooms.
- Rub with a clean dry cloth and smooth with rotating direction.
- Wipe again with a wet chamois until liquid mushrooms relievers are not left in the glass, then dry the glass with a chamois.

do it to 2 or 3 times for stubborn mildew.
In order to better results, do not coat the glass as a whole. Sprinkle some parts that will be our first rub. This is to help prevent blur effect (or like a rainbow when exposed to light) due to cleaning the dried mushrooms in the glass before we could rub it.

By considering the 6 points above, we can already eliminate fungus. However, for owners of cars made in Europe, there is little special attention when choosing a cleaning liquid yeast. Find a liquid which is devoted to European cars. Therefore, some European-made cars are more sensitive so sometimes the glass becomes dull or even scratched after polished. To avoid this you should ask the seller about the brand which can be applied to European car glass. To be even safer, you should try first on a small size glass, having polished and wait a few minutes to see the results.

If these measures had still not come to fruition, meaning fungus attached to your car's glass as very stubborn. This type can not be dealt with simply by cleaning fluid mushrooms. You need to bring the car to the salon. They have the tools and a special liquid to rub on the glass exposed to the fungus.

Do not forget, after the auto glass clean of mold, take care so that the fungus does not appear anymore. How to prevent it even simpler. First, immediately clean the car after driving in the rain so that dust or dirt does not stick long in the car glass. Second, for the glass front and back, always keep the washer water conditions so that we can use to clean the glass. Avoid using car cover if the weather is humid. If you would like to use, make sure the glass and car cover is dry before the vehicle is covered

How to Overcome tubeless tires Leaks Only a Few Minutes

This method is easy. You do not have to carry a motorcycle or car to the garage.

Tire leak is a frequent problem experienced by the driver of the car or motorcycle. Moreover, if a leak occurs in the middle of the road tires. For those of you bikers, builders will have to drive to nearest tire.

If you are using tubeless tires may be more relaxed. Because if the nail punctured tire, is more powerful than that used tire inner tube. If tubeless tires hit the nail, the nail will usually stuck on and new tires deflated several times slowly.

But, still, the tires will leak immediately when a nail pierced and slashed the tires. Ban will also instantly deflated. In fact, in addition to hard, repairing tubeless tires are much more expensive.

What is needed:
1. Pliers to remove nails or other objects that cause the leak.
2. Puncture iron, hot liquids, rubber patches inserts.
3. Knife
4. Smoothing leak

How to patch: 1. Check the tire leak and find the cause of the leak. Are the nails or other objects.

2. Use pliers to remove objects stuck in the tire, like a nail. Unplug carefully so as not to be larger leaks.

3. Insert into the hole that leaked smoothing. Pull-out in the hole a few times so that the hole that leaked into a smooth and large enough to insert a rubber patch. When finished, let the smoothing stuck in the tire.

4. Remove slowly and use a hot liquid adhesive to glue the parts are missing. Apply as much as two to three times until the liquid is evenly distributed.

5. Enter fillings rubber inserts that have smeared a little liquid glue into the hole using a puncture. Press firmly to arise protrusions. Ensure that the installation of the rubber inserts are done correctly and there are no leaks in that section.

6. Unplug puncture and leave for a few moments until the rubber inserts stick perfectly.

7. Pump the tires and cut the rubber inserts more prominent with scissors.

8. Consult the shop if it is still leaking.

That must be considered:
1. Always use protective gloves when using sharp objects such as knives, stab, and smoothing.
2. Using a smoothing tool can help in attenuating the tire, but it does not make your tires become worn and cause more leaks